Wednesday, May 25, 2011

Dynamic Easements – Part 3

Cleanup and Modifying

There are times we need to start and stop the easement. For example, the picture below shows the sanitary sewer crossing a right-of-way. The easement needs to stop at the right-of-way and restart on the other side.


clip_image002

Selecting the alignment will pull up the grip editing on the easements, which will allow you to change the starting and stopping station of the dynamic easement (offset alignment). The grip edit can be snapped to the intersection of the easement and right-of-way to make the easement stop at the proper location.

clip_image004

To restart the easement on the other side of the right-of-way, create a new offset alignment with the starting stations and the ending station at the proper location.

Wednesday, May 18, 2011

Dynamic Easements – Part 2

Getting Some Style
Now that we have the offset alignment representing the dynamic easement, it’s time to make an alignment style.

1. Select the offset alignment > quick properties > under style select Create/Edit

clip_image002

2. The alignment style pop up box will appear. Select the edit pull down and click Create New

clip_image004

3. The alignment style editor will pop up. For today, we are only changing four setting to create this style.
a. Under information tab, change name to “Easement”
b. Under display tab, change component type line color to yellow
c. Under display tab, change component type line type to dash
d. Under display tab, change component type line layer to easement

clip_image006clip_image008

4. Once the setting are ready, select OK

clip_image010

Now, the dynamic easement is ready.

Wednesday, May 11, 2011

Dynamic Easements – Part 1

Creating a Dynamic Easements
I want to start off by saying that dynamic easement is not a standard tool in Civil3D. Using a new tool added to Civil3D 2010 called offset alignments we can create easements that will update with your alignment.

For the example today, we are creating an easement for a sanitary sewer line. The alignment has already been created and represents the centerline of the sanitary sewer.

1. Deploy the offset alignment command
Home > Create Design > Alignment > Create Offset Alignment

clip_image002

2. Select the alignment to offset and the Create Offset Alignment box will pop up. The pop up box gives the ability to make changes like:
a. Station range
b. Number of offsets for both right and left
c. Incremental offset both right and left
d. Site
e. Alignment style
f. Alignment layer
g. Alignment label set

Settings we are going to use today:
a. Deselect station range from start to end
b. Keep number of offset to 1 on both right and left
c. Keep incremental offset at 10’
d. Keep site on none
e. Keep alignment style at offset (we will change that later)
f. Keep alignment layer the same
g. Keep label style at _No Labels


clip_image004

3. Once the settings are set, select OK.

Now the offset alignment is created. Every time the sewer alignment is moved, the offset alignment will move with the sewer alignment.

clip_image006clip_image008

Wednesday, May 4, 2011

How to extract 2D AutoCAD geometry from an Autodesk Inventor DWG Drawing File.

An article by Paul Munford (The CAD Setter Out) For CAD Clues Blog. 

If you regularly exchange drawing files with a Client, colleague or Contractor who is using Autodesk Inventor, then you may be interested in this simple trick for Extracting 2D geometry from an Inventor DWG file.

To try this out, you will need:
· An Autodesk Inventor DWG file
· AutoCAD!

TIP: You will need an Inventor DWG file – not an Inventor IDW file. This is Inventor’s own drawing file format and cannot be opened by AutoCAD.
 
clip_image002

Our DWG File open in Inventor.

OK, how do we go about it?
The process is simple. First we will open the Inventor DWG up in AutoCAD, and then we will hunt out the Information we need.

clip_image004

The Autodesk Inventor Sheet browser – showing the Views we wish to use in AutoCAD.



Inventor DWG Weirdness.
Inventor DWG files open up in AutoCAD just fine. You will see that the Paper Space layout looks just like Inventor’s Sheet layout.


clip_image006

Our DWG File open in AutoCAD.

However, you may notice a little Weirdness when you look in Model space – there is nothing there!
Although Inventor can create perfectly readable AutoCAD DWG files, the Inventor information is kept in its own magical world – somewhere between Paper Space and Model Space.
So how do we get at the Inventor Geometry?
The trick is simple – when you know it! The Inventor Views exist in the DWG file as AutoCAD blocks. So to get information from the Inventor drawing views, all you have to do is use AutoCAD’s ‘INSERT’ command.
 
clip_image008

The Autodesk Inventor Views are available in AutoCAD as ‘Blocks’.



Inserting an Inventor View as a Block in Model space.
While in Model Space in AutoCAD, type ‘INSERT’ at the command line and check out the list of available blocks in the drop down. You will notice that each block corresponds to an Inventor view.
Simply insert your desired view into model space as a block, making sure that the block is inserted at 1:1 scale. If you need to edit the geometry you could explode the block now.
TIP: You can also insert the Block information contained in the DWG file through the AutoCAD Design Centre. You will even get a nice preview!
 
clip_image010

The AutoCAD Design Centre is a great tool for raiding Inventor DWG’s for View Blocks.

Maintaining the Link
If you don’t explode the AutoCAD block, then Autodesk Inventor will continue to control the block definition. This means that you could X-Ref the 2D AutoCAD block into another AutoCAD drawing and maintain the link all the way back to the Inventor model.
Any changes in the Inventor 3D model, would update the Inventor DWG drawing file. When the Inventor DWG Drawing file is subsequently opened in AutoCAD the changes will register. When the X-ref’d drawing is opened the user will be prompted to update the X-ref’d Inventor DWG file – thus completing the chain.
What could you do with this technique?
Does this sound easy to you?
Have you already tried this method out?
How could you see this technique being used in your company?

Please feel free to leave a comment.
About the CAD Setter Out.

Paul Munford is a Joinery draughtsman (a ‘Setter Out’) for Beck Interiors, a UK based international Interior Fit out contactor which specialises in Museum Interiors.
Paul uses Autocad and Autodesk Inventor to create manufacturing ‘Workshop’ drawings day in – day out.
In his spare time Paul writes the ‘CAD Setter Out’ Blog and tries to explain to people why he goes to all the effort!